PTFE Presintered Resin DF-21C

No.

Item

DF-21C

First Grade

Quality

1

Smoothness and Cleaness

Clean and white surface, no metal impurity, the impurity quantity from 1mm to 3mm doesnot exceed two, without impurity which exceed 3mm.

Clean and white surface, no material impurity, the impurity quantity from 1mm to 3mm does not exceed four, without impurity which exceed 3mm.

2

Melting Point(°C)

327±5

3

Volume Density(g/L)

500~800

4

Flowing property(g/min)

450

5

Machining method

Ram extrusion

6

Average Grain, (μm)>

900

7

Main Usage

The presintered resin is suitable for continuously extruding of all type, pushing and pressing PTFE rod, tube and special shape.

8

Packing, Storage, and Transportation

1. PTFE is packed in double layer PVC bags inside and in hard circular barrels outside. On the barrel, there should be attached label and quality certificate, on which there are brand, reademark, executive criterion, type, grade, lot No., net content, pack date, checker and packager.

2. PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc impurity.

3. The products are transported according to transported according to non-dangerous goods. Heat, moisture, freezing and strong shhock should be avoided during transportation. Over-bumpiness and compression is apt to make the resin bind together.